IMC Formula i Lego Car Building
 
 
 
 
Maximum Length: 4.375 in 14 dots
'Wheelbase': 2.188 in 7 dots
Width of the car between the 'wheels': 1.875 in 6 dots
Maximum width of the car ahead of or behind the 'wheels': 1.875 in 6 dots
Maximum length of the car ahead of the 'wheels': 0.938 in 3 dots
Maximum length of the car behind the 'wheels': 0.625 in 2 dots
Minimum height at any point in the 'wheelbase': 0.250 in 2 plates
Minimum height of the 2 dots, 2 spaces behind the driver.: 1.375 in 11 plates
Maximum height at any point: 1.375 in 11 plates
Maximum height behind the rear 'wheels': 1.125 in 9 plates
Maximum height ahead of the drivers cockpit.: 0.750 in 6 plates
Minimum height of the 3 dots along each side of the cockpit.: 0.625 in 5 plates
The drivers cockpit is 2 dots wide by 3 dots long with a standard steering wheel in the first 2 dots.
The driver is a armless torso that sits on top of a flat square in the rear 2 cockpit dots.
Behind the drivers cockpit must be a standard 2x1x1.33 roll bar on top of 5 plates.
'Wheels' are 2x3 black slopes placed with 2 dots between them width wise and 5 dots lengthwise, at the bottom 3 plates of the car, slopes facing outward, each with a bost stud at the outermost point.
The bottom of the car must be flat plate 6x5 between the 'wheels' lengthwise at the height of the bottom of the 'wheels'
Heights do not include boat studs.
 
 
 
 
The driver is a standard mini-fig torso with a standard helmet and visor placed on a 2x2 flat plate.
Weight: 2.400 g